HT Elite Machine HT-030 fully-automatic partial annealing machine, had added the loading and uploading structure to the original annealing machine, is designed to anneal heating elements to enhance ductility and make a good preparation for bending after the tube is annealed.

Additional information

Power

3 phase 380v 50hz

Tube Diameter

6mm-16mm.

Tube Length

150 mm -1000 mm.(customized)

Air supply

0.5-0.7Mpa

Discover more about Partial Annealing Machine HT-030

HT Elite Machine HT-030 fully-automatic partial annealing machine, had added the loading and uploading structure to the original annealing machine, is designed to anneal heating elements to enhance ductility and make a good preparation for bending after the tube is annealed.

Partial annealing machine is used to make the annealled parts of the elements tube to increase the temperature by inputting low voltage and strong current. And then the annealled parts will cool in the air to get the purpose of anneal when the current is cut off. It can enhance the ductility and make a good preparation for bending after the tube is annealed.

Spot annealing machine has two pairs of electrodes in the left and right direction.

Because the distance between the two electrodes can be adjusted and the anneal tube length also can be adjusted.

The machine is controlled by PLC, and you can set the temperature in the temperature control meter to annealing tube.

Press the foot switch, the cylinder will push the electrodes to clamp the heating elements in the electrodes.

The cylinder will move back to the original position after annealing and the heating elements will unload automatically.

It is convenient to change the output voltage, electric current to adapt anneal of different materials and tube length according to adjustment of the current and time.

Features

  1.  Fully automatic loading and uploading.
  2. Save manpower.
  3. Reducing cost and improving the production efficiency.
  4. No pounding or vibration, causing off-center coils.
  5. High production capacity.
  6. Auxiliary equipment available.
  7. Automation in line possible.
  8. Quick change between different tube sizes.

 

Main technical parameters:

  1. Power supply: Tri-phase 380V, 50Hz.
  2. Air supply: 0.5-0.7Mpa
  3. Water output runoff:25L/min
  4. Applicable tube diameter: 6mm-16mm.
  5. Applicable tube length: 150 mm -1000 mm.(customized)
  6. Size(L*W*H): 1540*890*1480(mm).
  7. Weight: 900kg.

 Information required if order

  1. Tube diameter.
  2. Tube length.
  3. Tube material.
  4. Electrical supply (for example, single phase 220v 50hz).
    Add a header to begin generating the table of contents
    Scroll to Top

    Related Products

    EnglishSpanishPortugueseChinese (Simplified)

    Ask For a Quick Quote

    We will contact you within 1 working day, please pay attention to the email with the suffix “@ht-elite.com”