Categories: Coil Heater
Axial Clamp Coil Heater is designed with the exception of the clamping mechanism. The axial clamp is quick and easy to operate and is adjustable by the rotation of the cam shaft parallel to the nozzle axis
Axial Clamp Coil Heater is designed with the exception of the clamping mechanism. The axial clamp provides an improvement in the cam operated clamps for the clamping the heater element to the nozzle or probe.The axial clamp is quick and easy to operate and is adjustable by the rotation of the cam shaft parallel to the nozzle axis. This will allow easy installation in tight or hard to reach application. This configuration improves responsiveness and heat profile.
Technical Parameter
| Sheath Material | MGO |
| Resistance Wire | NI Cr 80-20 |
| Maximum Sheath Temperature | 700o |
| Die electric Strength | 800 VA/C |
| Insulation | >5 M W |
| Thermocouple | J Type (Standard) or K Type |
| Length Tolerance (Straight) | 5% |
| Wattage Tolerance | 10% (5% Available Upon Request) |
| REsistance Tolerance | 10% (5% Available Upon Request) |
| Unheated Length | 50 mm Standard |
| Dimension Tolerance | Coil I.D. 0.1 to 0.2 mm |
Advantage:
- Easy to adjust for tightening and removal
- Be positive for locking positioning
- Direct contact to the nozzle
- Replaceable external thermocouple
- Close matching of Ohms so that multiple axial clamp heaters can be controlled with a single thermocouple
Add a header to begin generating the table of contents
