1. Characteristics:

• Alloy 304 stainless steel is used to provide high temperature strength, good thermal conductivity and resistance to oxidation up to 1200°F(650°C). Alloy 304 is a Nickel-Chromium Stainless Steel.
• German Imported Nickel-Chrome resistance wire NiCr8020 is evenly stretched and strung through ceramic insulators.
• USA imported high purity Magnesium Oxide (MgO) is used to fill all remaining space inside the ceramic insulator, thus increasing thermal conductivity, dielectric strength and heater life.
• The standard termination, consisting of 30cm internally / externally connected flexible stranded nickel wire leads with high temperature insulation. To meet your different application, we offer other style leadwires, that will solve many of the most common application problems.
• Ceramic end cap protects the cartridge internally from outside contamination.

2. Parameter

Heat intensity	Not exceeding 30Wcm2 (advisable)
Power	Depends on the dimension
Escape of current (when cold)	<=0.1mA a 242 v.
Insulation (when cold)	5 Min Ohmios 500 Watts minimum
Dielectric strength	1500v. 1/seg
Working temperature	750ºG max.
Tolerance of length	+/-1.5%
Tolerance of diameter	-0.01 a -0.06 m/m
Tolerance of cut of connexion	+/-15 mlm
Power tolerance (w)	5 % – 10 %
Cold areas	Depends on length and diameter 5-25mm
Thermocouple Location	type J
	type K

 3.  Application:

• Molds and Dies
• Heat Sealing Equipement
• Laminating Equipment
• Food Processing
• Glue Guns
• Wax Pots
• Packaging Equipment
• Refrigeration
• Heating Liquids
• Labeling Machines
• Shoe Machinery
• Heating Gases